How Do I Clean My Concrete Floor After Grinding?

Making Your Concrete Floor Look Brand New Without Much Effort

 
Grinding a concrete floor is necessary if you want to maintain them in good condition. Unfortunately, it often leaves behind dirty and disgusting footprints. Of course, you’ll want to clean up any debris left behind, right?

If that’s your case, you came to the right place. In this article, you’ll learn how to clean your Arizona garage floor concrete coating to make it look new without much effort. Keep reading below for more info!

Before Cleaning, You Need A Good Grinding Technique

Although there are two techniques for grinding floors, wet and dry, dry grinding is becoming popular since it is quicker and more convenient. Furthermore, if you choose wet grinding, you will have to wait at least 24 hours (after the tiresome slurry clean-up) for the floor to dry.

Dry grinding, on the other hand, allows you to continue working on your project after the grinding is finished, but the process leaves a lot of dust behind, thus quality dust-control equipment is essential. You also need to be able to view the surface when grinding (for example, to see if your scratch pattern is accurate), so you must keep the dust off the floor.

Any reputable concrete equipment rental company will provide high-quality vacuums that can be attached to dust-controlled grinders.

With this information in mind, let’s see the best way to clean your concrete floor after grinding.

Stay Away From A Household Vacuum

When attempting to clean up their concrete floors, homeowners naturally want to use the things that are easier to get.

It might be acceptable in some cases, but not for concrete floors because it can lead to many issues. A household vacuum won’t be able to remove the fine dust from the floors.

Not only are these vacuums inadequate for the task at hand, but their filtration systems aren’t strong enough to handle the amount and the type of dust. Moreover, you put at risk the motor by allowing the dust to enter it and cause damage.

In most cases, using a domestic vacuum will result in machine damage. This is why you should consider hiring an industrial vacuum. These devices are made to handle challenging tasks. You might need to contact experts with the necessary tools to conduct this work if you can’t find one of these vacuums to rent.

Choose A Vacuum With An Easily Accessible Filter Housing

Before hiring any concrete equipment, find out how simple it is to change the vacuum filters and how frequently they must be changed. Similarly, find out if the vacuums have a bag system that facilitates trash disposal.

Check The Air Flow Rate Of The Dust Collector

When looking for a dust collector/vacuum to clean your concrete floors, you have numerous options. Spend time learning more about each dust collector for your Chandler epoxy floor coating rather than completing your investigation quickly. An excellent technique to determine if the machine is the correct match is to look at its airflow rate.

The higher the air flow rate, the easier it will be to clean up all of the dust. A machine with a high airflow rating may cost more, but it will be worthwhile in the long term.

Having a HEPA Filter System Is Crucial

It is crucial to have a professional-grade dust collecting system to preserve air quality because airborne dust particles have the potential to be dangerous. When it comes to vacuums, HEPA-type (high-efficiency particulate air) filters are the best.

Take Time To Clean Up Concrete Dust

If you’re new to the world of concrete grinding, you will be undoubtedly surprised at how much dust can be created. Before all of the dust is up, you will need to sweep the floor with the dust collector/vacuum that you rented a few times. The time and effort you put into cleaning will be well worth it because it will make applying the epoxy much easier.

Top-Rated Epoxy Coatings In Arizona

If you’re starting a concrete grinding or polishing project and want to do it professionally and with an affordable price, consider hiring the pros at Barefoot Surfaces. We have many years of experience in epoxy concrete floors, so we’ll make sure you have the best results. Visit our website or call us for more information!

Barefoot Surfaces
740 E Redondo Dr
Gilbert, AZ 85296
Phone: 602-931-7656
Email: ricr@309.2c2.myftpupload.com
Website: https://barefootsurfaces.com/